TOP 10 MONOBLOCK AMPS

1. Alpine MRV-M1200 Monoblock 1200 Watts RMS Class D Amplifier

Gain Control: Continuously Adjustable Gain Control | Remote Turn On: Remote Sensing Function (for Speaker Level Input) | Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection | Board Circuitry: S.T.A.R. Circuit | RCA Output: Non-Fading Pre-Amp Output (4 Volts)

Speaker-Level Inputs: 4-channel Speaker Level Inputs | Power Indicator: Top Mounted Blue LED Power Indicator | Thermal Control: Multi-stage Power Limits | Power Requirements: 14.4 V.DC (11-16V allowable) | Input Sensitivity (RCA Input): 0.15 - 4.0 V | Input Sensitivity (Speaker Level Input): 0.4 - 10 V | Input Impedance: >10k ohms

Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz | Damping Factor (10W into 4 Ohms at 100Hz): >750 | Signal to Noise (1W into 4 Ohms): >85 dB | Signal to Noise (Rated Power into 4 Ohms): >105 dB | Preamp Output: 4.0V Max. | Remote Level: -20 to 0 dB

RMS Power Ratings: Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N) | Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N) | Max Power Output Ratings: Total Max Power: 2400 W | Dimensions: Foot Print (WxHxD) in: 7.87 x 2.16 x 7.87 in | Heat Sink (WxHxD) in: 6.50 x 2.16 x 7.87 in

2. BOSS Audio AR2000M Armor 2000 Watt, 2/4 Ohm Stable Class A/B, Monoblock, Mosfet Car Amplifier with Remote Subwoofer Control

POWER: 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms. Low Pass Filter 50 Hz to 250 Hz

CLASS A/B TOPOLOGY: Class 'A' amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class 'B' amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game

LOW / HIGH LEVEL INPUTS: A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

DIMENSIONS: The AR2000M is 13.1 inches in Depth, 6.5 inches in Width and 2.8 inches in Height. It can be installed in a variety of different places due to its' slim and compact design

WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com

3. Planet Audio BB2500.1 Big Bang 2500 Watt, 1 Ohm Stable Class D Monoblock Car Amplifier with Remote Subwoofer Control

2500 W MAX Power @ 1 Ohm x 1 Channel

1250 W MAX Power @ 2 Ohm x 1 Channel

625 W MAX Power @ 4 Ohm x 1 Channel

Low Level Inputs, RCA Pre-amp Outputs, Switchable Phase Control

Variable Low Pass Crossover, Variable Bass Boost, Variable Subsonic Filter

Remote Subwoofer Control

Dimensions: Depth 11.4" x Width 7" x Height 2.4"

6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers

4. Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W

Ultra Compact MOSFET Monoblock Class D Car Amplifier

RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)

Frequency Response: 15Hz - 270Hz

Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB

8 Gauge Power and Ground Input Terminals

5. Power Acoustik RZ4 3000D Razor Series Class D Full-Range & Monoblock Amp 4 Channels, 3,000 Watts Max

Class D

Small, Compact 4.75" Chassis

Mosfet Pwm Power Supply

High-level Input

Dim: 1.63"h X 4.75"w X 12.25"d

Above are the 5 products we think are the top 5 monoblock amps

6. CT Sounds T-1500.1 Monoblock Car Amplifier 1500w Amp

1500w RM at 1 ohm 14.4v

3000w max at 1 ohm 14.4v

0ga inputs

Bass knob included

7. Hifonics GA-5000.1D 27.10in. x 10.30in. x 3.70in. Goliath Series Monoblock Super D-Class(tm) Amp (5,000 W)

1ohm stable

Ultra-fi MOSFET amp is designed for music reproduction

0Deg -180Deg Phase adjustment

Nickel-plated RCA jacks resist corrosion

Internal Variable Crossover Network allows for audiophile control of EQ circuits

8. Planet Audio AC4000.1D Anarchy 4000 Watt, 1 Ohm Stable Class D Monoblock Car Amplifier with Remote Subwoofer Control

4000 W MAX Power @ 1 Ohm x 1 Channel

2000 W MAX Power @ 2 Ohm x 1 Channel

1000 W MAX Power @ 4 Ohm x 1 Channel

Low Level Inputs, RCA Pre-amp Outputs, Switchable Phase Control

Variable Low Pass Crossover, Variable Bass Boost, Variable Subsonic Filter

Remote Subwoofer Control, Blue Backlit Illumination

Dimensions: Depth 15" x Width 10" x Height 2.4"

6 Year Platinum Online Dealer Warranty

9. Rockville dB12 2000w Peak / 500w RMS @ 2 Ohm CEA Compliant Mono Car Amplifier

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner's manual. Mounting Screws. Warranty.

Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel <1% THD+N. 4 Ohm: 300 Watts x 1 Channel <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.

Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).

Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 13.1˝.

10. Hifonics Zeuz ELITE ZEX1950.1D Car Audio 1900 Watts RMS Mono Block Amp with Blue illuminated Logo 1 Ohm Stable Class D Subwoofer Black Amplifier with Remote Bass Boost Control Knob Included

RMS Power Rating: 4 ohms: 525 watts x 1 chan. | 2 ohms: 950 watts x 1 chan. | 1 ohm: 1900 watts x 1 chan. | Simpatico coil design (SPC) Ultra-Fi Pulse Width Modulated MOSFET power supply | LED power (blue) and protect (red) indicators

Wired remote bass level control included | Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) | Blue illuminated Hifonics badge | Soft start sound function | Mono channel operation

Preamp RCA outputs to daisy chain multiple amps

4-Way System Protection circuitry (thermal, overload, DC, and speaker short protection)

Dual 12 gauge speaker terminals simplify hookup

For an updated list go to: https://www.noplacecalledhome.com/best-monoblock-amps/

eyearies8’s diary

top 10 monoblock amps